The Systems F3 Access Panel consists of a welded aluminum frame and is available with 1/2″ or 5/8″ in-layed drywall and two standard concealed touch latches.
Both the outer and an inner frame assembly of the Systems F3 Access Panel consists of high-grade aluminum which is bonded with a special welding process.
For sizes 12” x 12” and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed.
The reveal of 1/8 of an inch is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring-loaded latch side.
The access panel is aligned to the grid dimensions of tiles. Information on the dimensions is required from which dimensions and can be ascertained.
This access panel is designed for tiling applications in walls.
System F3 Access Panel Features
- Removable Door Panel
- Non-Rated Access Door
- Drywall inlay of either 1/2″ or 5/8″
- Tilable
- Made in the USA
- Flush Installation in ceilings and walls
- Virtually invisible after finished with tile
System F3 Access Panel Locking and Latching Options:
- Touch Latches (standard)
- Small screwdriver Operated Cam Latch
- Screwdriver Operated Cam Latch
- Pinned Hex Head Cam Latch
- Mortis Cylinder Lock Preparation
- Small Hex Head Cam Latch
- Hex Head Cam Latch
- Screwdriver Operated 4-Square Cam Latch
- Round Lock with Key
Standard sizes: 8″ x 8″, 12″ x 12″, 16″ x 16″ 18″ x 18″, 20″ x 20″, 24″ x 24″
Contact us for more information on custom sizes and additional locking information.