Acudor RHA Aluminum Equipment Roof Hatches are designed to provide convenient, economical, watertight access to a building’s roof where more extensive access is required. The larger opening allows equipment installed or removed from a building through the roof. These hatches are designed with safety, durability, and ease of operation.

RHA Aluminum Roof Hatches Features

• Stainless Steel Hardware is standard on all hatches
• 1″ Polyiso (R-6) insulation standard on all hatches
• EPDM foam weather/draft seal gaskets provide weather-tight construction
• Supports 40lbs./sq. ft. live load

RHA Aluminum Roof Hatches Specifications

• Cover: Double-skin construction  (“in-box type design”) with 1″ Polyiso (R-6) insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of the cover to provide a flush, tight fit and designed to support a live load of 40 pounds/sq. The cover is 1/8″ thick aluminum with a 20 gauge aluminum inside the liner.
• Curb: The curb is 1/8″ thick aluminum with 1″ Polyiso (R-6) insulation at the exterior. It is 12″ high, with a 3.375″ wide bottom flange and pre-drilled mounting holes.
• Hinge: Heavy-duty aluminum pintle hinges with a 3/8″ stainless steel pin
• Opening: Gas spring operators allow the cover to open and close easily. Stainless Steel inside pull handle allows for easy control when closing the cover.
• Door Latch: It is self-latching, and the outside T handle is stainless steel, with a stainless steel inside lock and lever assembly. The unit also has inside and outside padlock provisions.
• Finish: Mill Finish

RHA Aluminum Roof Hatches Options

• Painted and Anodized finishes
• Polycarbonate domes for daylighting
• Louvered Curbs
• Curb Mounted Units
• Curb pitch corrected for sloped roof
• Higher curb heights for green root applications

Contact us for more information on custom sizes and additional locking details.