Ultra-Lath® Plastic Lath can be used for either exterior or interior vertical application; should only be used for non-rated assemblies. It’s easy to handle and cuts with a utility knife. Light weight, non-rusting.
The 1/8″ self-furring ridges provide exceptional keying and are applied towards the substrate. ULTRA-LATH® is impervious to sand and any harsh chemicals found in Portland-based stucco. It may be installed over any code approved substrate. Can not be used in horizontal soffit applications. Plastic Ultra Lath can be used as reinforcing in a heated floor.
Note: The Ultra Lath Plus, 27″ x 75′ x 1/4″ is yellow and the 27″ x 100’x 1/8″ is gray.
Specification
ULTRA-LATH® shall be Plastic Components Inc. It shall be used where specified by the architect and installed per industry standards ASTM C1063 and ICC-ES Report #94182.
Contact us for more information on PVC Accessories by Plastic Components.