GFRC Extrior Access Panel allows for easy access inan exterior wall or ceiling with a seamless appearance. AExterior ll panels are "paint ready" and any texture can be applied.
JL Industries Wheeled Multi-Purpose Extinguishers are for Class B, C Fires and contain a siliconized sodium bicarbonate base, the traditional dry chemical.
Karp's KSTC is an access panel made for suspended grid ceiling systems.
Plastic Components model 300 Continuous Soffit Vent is used with 3/8-inch sheathing.
Continuous Soffit Vent
Plastic Component's model F-551 is an F-Clip used when a vent carries from a horizontal position to a vertical wall.
The Plastic component's Wall Angle is an acoustical ceiling wall angle shadow molding.
The Metacaulk 1200 is a water based general purpose firetop that is self leveling and non sag. It can be caulked , brushed, pumped or poured.
DriftCorner is a simple solution for accommodating lateral drift at the corner of a wall.
Assembled fasteners used to attached EIFS Finish Systems with EPS insulation to be attached to masonry and concrete.
The Acudor FT-8050 is a hinged recessed floor door that has a recess of 1 inch ready to accept tile, terrazzo or concrete.
The Acudor UF-5000 is a 14 gauge flush access door with an exposed flange suitable for mounting in drywall or block walls or ceilings.
The Acudor UF-5500 is a stainless steel flush access door for installation in walls and ceilings in drywall, plaster, masonry, tile or any flush surface.
The UF-5500 is a flush mounted non rated door for both walls and ceiling. The door is a pan shape giving it added strength.
Carve 360 Hot knife electrical box blades are used to cut notches in foam for single and double gang electrical boxes.