Transitional Floor Line Bead, Item 1623, is for the 5/8-inch board to protect the bottom board edge from moisture.
Plastic Component's Ultra Corner, model 211, is a flexible drywall trim that is only 1/16-inch thick for installation where angled corners meet in ceilings and walls.
Surface Mounted expansion joint for 3/8" EIFS finish.
Ultra Lath Plastic Sheets are 1/8 inch and self ferring. They are 27 inchs x 96 inches. 10 sheets per bundle. 25 bundles per pallet.
Self Furred plastic Ultra Lath Plus (yellow) made by Plastic Components has 1/4" ridges for exceptional keying. This is the waterproof heavy duty alternate to metal lath.
The Potter Roemer Buena Fire Extinguisher, a surface mounted fire extinguisher cabinet with a full acrylic door.
A water-based paintable intumescent fire rated sealant and smoke seal available for construction joints and through penetration openings that will prevent the spread of flames, smoke, hot gases, and water.
BC600 & BC800 secures BB150 or 1½” cold-rolled channel (CRC) to stud, resisting both lateral and twisting loads. Installs quickly.
The StiffClip TD has a unique design which allows for the anchoring of wood or steel studs to the foundation incorporating a steel stiffening plate for strength.
StiffClip JH connects floor joists to beams. StiffClip JH resists vertical loads. Design loads consider clip strength only. Size and number of fasteners used are based on fastener manufacturer’s allowable load data.
A Roof Tie secures and ties down the roof framing member. With the stiffened ribs for added strength, the StiffClip RT meets all building code criteria.
Verti Clip SLD connects metal studs at the head condition (top-of-wall) to the deck or primary frame while allowing for a total vertical deflection; utilizes non-binding step bushings.
This hot knife kit includes the 2-QC Hot Knife, sled straight blade and flat blade material. Makes cutting and shaping foamed plastics easy and inexpensive.
Assembled fasteners used to attach EPS insulation to wood, lite metal, steel, and masonry.
Acudor's ADWT is a flush mounted gasketed airtight and watertight access door made for environments such as operating rooms, labs etc. This door is made of 16 gauge prime painted steel. Also available in Stainless Steel.