Plastic conponents 222P is a 10 foot long concrete drip edge that creates a 1/2 inch drip edge in concrete forming. Sold 50 per box.
Plastic Components model 230-50 is an inside corner PVC trim piece used in lamination of vinyl wall covering. Sold 50 per box.
The INBOX Low profile Electrical box for EIFS wallls comes in 2 variations: adjustable or fixed with either a clear or white cover. Sold in a package of 4.
Ultra Lath Rolls are 27 " x 100 ', 225 SF per roll. 18 rolls /Pallet.
The Potter Roemer Dana Fire extinguisher cabinet is a made of painted steel.
Metacaulk 350i is a water-based intumescent firestop sealant that can be applied with a caulking gun, bulk loading gun, troweled or pumped to seal construction joints and through penetrations.
DriftClip®DSLS is available to accommodate vertical deflection and lateral drift requirements. Step Bushings pre-installed in vertical slots allow up to 2” vertical deflection
The StiffClip LB connects exterior wall studs to the building’s structure through a unique design incorporating the use of stiffened legs of a 90-degree angle to increase bending strength.
StiffClip PL connects truss framing members in the same plane and has guide holes for quick attachment to framing members.
Hot knife kit with 2-QC Hot Knife, sled, straight blade, groove kit, rasp and more!
Zinc plated screw assembled fasteners are assembled fasteners and plates for use with dimensional lumber plywood-type sheathings and metal sidings.
Groove sled with an adjustable blade holder designed to work with hot knives.
Acudor's ADWT is a flush mounted gasketed airtight and watertight access door made for environments such as operating rooms, labs etc. This door is made of 16 gauge stainless steel. Also available in prime painted steel.
The Acudor AP-5010 is a non-rated recessed access panel for acoustical plaster walls and ceilings.
The Acudor FA-300 is a cast in place aluminum floor door with a 300 lb/sq.ft. load rating.