Floor Line Z-Flashing for floor line joints or gable applications.
The Alta Fire Extinguisher Cabinet is a steel cabinet available in 4 mounting configurations.
The Metacaulk 1000 is a water-based intumescent caulk fire-rated sealant for construction joints to prevent the spread of fire, smoke, and hot gases through walls and ceilings.
The Steel Network TSN DriftClip DSLB is a Light gauge steel framing connector available to accommodate vertical deflection and lateral drift requirements.
The StiffClip CL allows for the connection of steel studs to the building’s structure by incorporating stiffened legs of a 90-degree angle to increase bending strength. StiffClip CL resists vertical, horizontal, and torsional loads.
StiffClip JC series connects floor joists to beams and other structural components while resisting vertical loads.
Remove stains, rust, scale and other mineral deposits from masonry, stucco and other wall surfaces.
The 2-QC hot knife will cut foam clean and accurately with no bead dust and the handle stays cool.
Wind Devil 2 Plates allow for attachment of EPS Insulation to a variety of substrates including wood, lite metal, steel, and masonry.
Acudor's ARVB is a recessed valve box made of 16 gauge prime painted steel. Available in standard sizes 8" x 8" and 12" x 12" with three wall depths.
Acudor's ARVB is a recessed valve box made of 16 gauge stainless steel. Available in standard sizes 8" x 8" and 12" x 12" with three wall depths.
The Acudor DW-5040 is a non-rated drywall access door that has a drywall bead flange for installation into walls and ceilings.
The Universal Depth Stop is used to set EIFS washers to a consistant uniform depth.
The Groove Jet 400 kit is a hot knife used to cut aesthetic grooves and will cut the foam all the way to the inside corners.