The Carve360 EIFS Starter kit is a cordless hot kife which includes a carrying case, 2 rechargeable batteries, blades, wire, and an adapter.
The Hot Knife CR Pro Kit offers a 150 Watts of cutting power with a hot knife foam cutter with a spring loaded safety trigger. The kit also includes a groove adapter, blades, NWFW Wire, crimping pliers and more.
Bend and cut flat Ni-chrome wire with this crimping plier.
These Heavy Duty Wire Cutters are used to cut NWFW, NWRW, NW100, and IW100 Hot knife wires, as well as, wire rope and other hardened steel.
The Galaxy Dry Chemical Fire Extinguisher is a traditional dry chemical (siliconized sodium bicarbonate) used in class B & C fires. Extinguishers are available in 2.5 lb, 5.5 lb, 10 lb, and 20 lb.
Karp's medium security access door DSB-123SD-MS is a 12 gauge steel door used in areas where a more secure access panel is required.
Karp's DSC-210PL is a recessed access door for plaster walls with a 16 gauge steel door which can accommodate 1/2 inch plaster.
Karp DSC-214M is a universal flush mounted stainless steel access panel with a removable access door.
Karp's KAFA recessed floor door is available in a variety of panels – recessed 1/8″ for resilient tile, smooth, abrasive coated and embossed diamond pattern. Frames are easy to install and are sealed with a rubber cork strip.
The KRHG Galvanized Steel Roof Hatch includes heavy gauge stiffeners for added support and stability. The exterior handle is a push-button lock release located on the front side of the cover, shielded from environmental elements to prevent water accumulation and leakage.
The Karp KRP-250FR is a non-insulated 2-hour fire rated access panel for installation in walls.
Karp's KRP-250FR stainless steel access door is an uninsulated 2-hour fire rated access door for walls with an exposed 1-inch flange.
The original Karp STC door is an acoustical door with a sound rating of 55 providing noise reduction capability.
Karp's STC 64 is an acoustical access door is designed to reduce sound and noise transmission.
Transitional Floor Line Bead, Item 1623, is for the 5/8-inch board to protect the bottom board edge from moisture.